Cellular, 5G & MIMO
Cellular network, multi-port MIMO, combination, outdoor and vehicle antenna categories.

RF Product · Coaxial Cables & Connectors
SKUGL67008650FEP
50 Ω semi-flexible coaxial cable with a silver-plated copper inner conductor, solid PTFE insulation and an FEP jacket.
Specifications
Engineering selection guide
RF Coaxial Cable
The GL67008650FEP is a 670-086/50 semi-flexible RF coaxial cable with a silver-plated copper inner conductor, solid extruded PTFE insulation and an FEP jacket. The outer conductor is tinned-soaked copper wire braid. Its characteristic impedance is 50 ±2 Ω, and the overall jacket diameter is 2.65 ±0.10 mm. These construction details distinguish the cable from other similarly sized coaxial products.
Cable selection can use the supplied attenuation and mean-power table rather than a single loss figure. The table covers 800–20000 MHz, with attenuation stated at 20°C and sea level and mean power rated at 40°C ambient. Separate VSWR limits are provided for five frequency ranges. The source also gives a 6 mm minimum bend radius, a 20 mm repeated-bend radius for 40 cycles, and distinct installation, storage and operating temperature limits. The company datasheet preserves these conditions alongside the electrical values.
Specification notes: Attenuation: 20°C at sea level. Mean power rating: 40°C ambient. Requirements and compliance statements are reproduced from the source specification, not independent certifications.
Current documentation
RF Product
Online · Always here to help