Custom antenna manufacturing
Start from a catalogued antenna when the RF architecture is already suitable and your project needs a different connector, cable arrangement or mounting interface. Identify the original model and each requested change so that the new configuration can be reviewed without mixing specifications.
Standard product or a new design?
A defined specification keeps the quotation tied to the product you need. Use an existing model as the reference when only the cable, connector or mounting arrangement changes. A new antenna concept needs a separate engineering review.
Prepare your project brief
Include operating bands, device interface, enclosure drawing or available space, mounting method, expected quantity and delivery destination. Identify any environmental or documentation requirements separately.
From requirements to an agreed configuration
- Share the requirements and any reference model or drawing.
- Review the proposed configuration and identify parameters that still require confirmation.
- Agree the sample specification and the checks needed on your device or installation.
- Confirm the production configuration, documentation and order terms before ordering.
Compare product configurations
| Model | Frequency | Gain | Connector | Datasheet |
|---|---|---|---|---|
| GL-DY006 | 1575.42±1/1601-1610 | — | MCX R/A male | |
| GL-DY008 | 1575.42±1/1601-1610 | — | SMA male | |
| GL868915 | 868-915 | 3 | SMA male | |
| GLF86803 | 868+/-10MHz | — | — | |
| GL-DY2458V48 | 2400-2500/5150-5850 | 8 | 4×N-K | |
| GL-DY2458V2H2812 | 2400-2500/5150-5850MHz | 8/12 | 4×N-K |
Values below are copied from the individual product records. Where a unit or value is not stated, consult the model datasheet before specifying the part.
Purchasing questions
Can I change the cable or connector?
Describe the cable length, connector type and installation constraints in your enquiry. A change is subject to review for this exact model; the published configuration is the reference until a revised specification is confirmed.
What should I send for a sample or production quote?
Include the model, expected quantity, delivery destination and any drawing or interface requirement. Ask for confirmation of the sample configuration, lead time and production terms before placing an order.
How should I choose between these models?
Start with frequency coverage and the device interface. Then compare mounting, cable and physical dimensions. Gain figures must be read with their stated conditions; a larger value alone does not establish a better fit.
Company and manufacturing information · Product catalogs and datasheets · LoRa
Discuss your antenna requirements
Send the model, operating band and installation requirements. We will review the configuration and confirm pricing, samples and delivery for your project.
