Cellular, 5G & MIMO
Cellular network, multi-port MIMO, combination, outdoor and vehicle antenna categories.



RF Product · Combo Antennas
SKUGL7001A01
Modular multi-system antenna with separate cellular, Wi-Fi and GPS specifications and SMA plug connections.
Specifications
Engineering selection guide
Combination Antenna
The GL7001A01 combines 5G/LTE, Wi-Fi and GPS antenna functions in a modular assembly. The cellular specification lists 690–960, 1710–2690, 3300–3800 and 4200–5000 MHz. Wi-Fi is specified at 2400–2500 and 5150–5850 MHz. SMA plug connections and RG174 cable are identified in the datasheet. Cellular polarization is vertical, while the Wi-Fi path is linearly polarized.
The GPS section has an RHCP ceramic patch and a low-noise amplifier with a typical gain of 28 ±2 dB at 2.8 V. Its stated DC input range is 2.5–5.5 V. The datasheet describes a modular baseboard with reserved positions for 5–9-in-1 configurations; the exact configuration should therefore be stated with the inquiry. The downloadable datasheet separates nominal specifications from measured gain and efficiency by port, and keeps the lowest-band frequency and test conditions distinct.
Specification notes: Cellular frequency starts at 690 MHz; VSWR and gain conditions for the lowest band start at 700 MHz. Wi-Fi peak gain is listed as 2.0 without a unit in the datasheet table. Measured test results are distinct from nominal specifications.
Current documentation
RF Product
Online · Always here to help