GLNAT65WXXDB is a 5 W fixed coaxial attenuator specified for DC–6 GHz, 50 Ω impedance and maximum VSWR of 1.25. Specifications include N-J (male) / N-K (female) connectors and attenuation options from 1 to 40 dB in specified groups.
Attenuation values1–10, 12, 13, 15, 20, 25, 30, 40 dB
Attenuation tolerance (1-10 dB)± 0.6 dB
Attenuation tolerance (12-20 dB)± 0.8 dB
Attenuation tolerance (25-40 dB)± 1.0 dB
ConnectorN-J (M) / N-K (F)
Optional connectorsSMA, DIN, 4.3-10 (JU or KK); any two may be combined
Weightapprox. 80 g
Operating temperature-55 to +125 °C
CategoryAntenna related products
Engineering selection guide
Product details
How this model fits the documented RF, interface and installation requirements.
GLNAT65WXXDB overview
Choose the attenuation and connector from the documented options
GLNAT65WXXDB is a fixed coaxial attenuator specified for DC–6 GHz operation at 5 W. Its listed input impedance is 50 Ω and maximum VSWR is 1.25.
The specifications group attenuation options by tolerance: 1–10 dB at ±0.6 dB; 12, 13, 15 and 20 dB at ±0.8 dB; and 25, 30 and 40 dB at ±1.0 dB. Specify the required value when requesting this model.
The drawing identifies N-J (male) and N-K (female) interfaces on a φ20 × 66 mm body. Options include SMA, DIN and 4.3-10 connector options, including JU or KK configurations.
Send the required band, connector, installation limits and quantity. We will review the request against the selected model.Request a Quote→
Compare product configurations
Compare the exact model and its published specifications before requesting a sample or production quote. A connector or cable change must be confirmed for the selected model.
Values below are copied from the individual product records. Where a unit or value is not stated, consult the model datasheet before specifying the part.
Before ordering
Match every required operating band, rather than relying only on a product-family name.
Check connector gender, cable route, mounting space and the interface on your device.
Use the exact model datasheet to confirm the test conditions and installation limits.
Select a standard model or discuss a change
For a standard configuration, send the model number and expected quantity. For a change, include the required band, enclosure space, cable length and connector. Sample availability, minimum order quantity and delivery are confirmed with the quotation.
Which specifications should I confirm for this model?
Use the listed frequency, connector and mounting information together. Compare the values with your radio interface and available installation space; do not substitute parameters from a similar-looking model.
Can I change the cable or connector?
Describe the cable length, connector type and installation constraints in your enquiry. A change is subject to review for this exact model; the published configuration is the reference until a revised specification is confirmed.
What should I send for a sample or production quote?
Include the model, expected quantity, delivery destination and any drawing or interface requirement. Ask for confirmation of the sample configuration, lead time and production terms before placing an order.
Discuss your antenna requirements
Send the model, operating band and installation requirements. We will review the configuration and confirm pricing, samples and delivery for your project.
