GL-DY150C 134-173 MHz 3.2 dBi Fiberglass Omni Antenna
SKU GL-DY150C
GL-DY150C fiberglass omni antenna for 134-173 MHz, 3.2 dBi, 50 W, with UHF or N female connection. Built for a longer broad-band VHF fiberglass omni that keeps the same 134-173 MHz operating window while giving a more efficient 3.2 dBi vertical radiator.
Need custom cable length, connector, or frequency support? Send us the SKU and project requirements.
| SKU | GL-DY150C |
|---|---|
| Frequency | 134-173 MHz |
| Dimensions | 1.8 m |
| Connector | UHF or N female |
| Application | broadband VHF fiberglass omni antenna |
| Bandwidth | 25 MHz |
| Gain | 3.2 dBi |
| Vertical Beamwidth | 60° |
| VSWR | <= 1.5 |
| Nominal Impedance | 50 Ω |
| Polarization | Vertical |
| Maximum Input Power | 50 W |
| Length | 1.8 m |
| Weight | 2.0 kg |
| Rated Wind Velocity | 60 m / s |
| Remarks | Fiberglass Board band |
| Category | Fiberglass Omni Antenna |
Overview
The GL-DY150C is a longer broad-band VHF fiberglass omni that keeps the same 134-173 MHz operating window while giving a more efficient 3.2 dBi vertical radiator. It gives system designers a clean vertical omni pattern for fixed RF coverage where the signal must serve users around the site rather than only in one direction.
RF Performance
Its core RF specification is 134-173 MHz, 3.2 dBi gain, 50 W maximum input power and UHF or N female connection. Bandwidth is listed as 25 MHz, VSWR as <= 1.5, and the feed is 50 ohm, making it suitable for conventional base-station, repeater and monitoring equipment.
Build and Installation
The antenna uses a 1.8 m outdoor structure with vertical polarization and a 60 m / s wind rating. The source notes identify the construction as Fiberglass Board band, so the listing keeps the mechanical claim tied to the original product data rather than adding unsupported material claims.
Typical Applications
- VHF repeater and base-station coverage
- Utility telemetry, paging and dispatch networks
- Rooftop, mast and tower installations
- Fixed RF test sites and engineering labs
Selection Notes
Choose GL-DY150C when the site needs an omnidirectional VHF or private-radio antenna with the frequency and gain profile above. If the path needs sector coverage or a point-to-point link, compare the requirement with directional products before using an omni antenna. Confirm frequency plan, connector, mounting hardware and site wind exposure before ordering.
Related Resources
- Browse the RF antenna product range
- Review common RF antenna applications
- Check available technical drawings and datasheets
- Request a quote with connector and mounting details
Technical Specifications
| Frequency Range | 134-173 MHz |
|---|---|
| Bandwidth | 25 MHz |
| Gain | 3.2 dBi |
| Vertical Beamwidth | 60° |
| VSWR | <= 1.5 |
| Nominal Impedance | 50 Ω |
| Polarization | Vertical |
| Maximum Input Power | 50 W |
| Length | 1.8 m |
| Weight | 2.0 kg |
| Rated Wind Velocity | 60 m / s |
| Connector | UHF or N female |
| Remarks | Fiberglass Board band |
Selection and Project Support
GL-DY150C 134-173 MHz 3.2 dBi Fiberglass Omni Antenna is listed by Rftech for RF antenna and wireless connectivity projects in the Fiberglass Omni Antenna category. Use the specifications, images, and notes on this page as the starting point for model review before requesting drawings, samples, or customization support.
Integration Notes
Before production, confirm the operating band, connector, cable, mounting method, available installation space, and target application environment. Rftech can help review these details against the information already shown for this product (SKU GL-DY150C).
Customization and Documentation
For OEM or ODM projects, contact the team with your required frequency range, connector preference, cable length, mechanical limits, and expected use case. Product drawings, samples, and project-specific recommendations can be requested when the available page details are not enough for final selection.
Similar Products
Explore related antenna options
